Material Width: 96â
Please Note: Natural shades may have variations and visual inconsistencies in color, grain and texture. They may also crack or split, twist or bow, shrink or stretch, and change color over time due to aging, direct sunlight or other climatic conditions. These unique characteristics are inherent in natural materials and are not considered defects in material or workmanship. Exact color matches cannot be guaranteed.
Characteristic of Woven Wood Shades*:
Â·Assymmetry: Materials used in Natural Shades are grown and harvested naturally. Variations in shape, thickness, texture and grain are to be expected by Mother Nature. While providing personality to each shade, these variations created asymmetry in the weave that may alter the appearance of the finished shade. Specifically, you may notice:
oUneven spacing or gaps: differences in bamboo or reed shapes and thickness can create uneven spacing or gaps in the weave
oPattern changes or gaps: different thicknesses of grassy materials, tied knots, and splices can create visual disruptions in the weave pattern or gaps in the weave
oLength Differences: variations in bamboo thicknesses, bamboo joints, or reed sizes can create length differences from one side of the shade to the other
oBowing or arching: different drying rates of bamboo fibers on one side and skin on the other side of the bamboo slat can create a bowing or arching effect in the finished shade.
All materials used are hand-selected to strict specifications to minimize variations. These variations are not considered flaws or defect, but rather normal characteristics to be expected from naturally grown materials.
Â·Color: Mellowing with age, bamboo, reeds, jute, grasses and other natural materials will change slightly in color over time. Depending on material composition, they may lighten or darken due to direct sunlight or other climatic conditions. Uncolored bamboo will experience the most color shift, changing from a green color at harvest to a yellow-brown color over three to six months. Color matches from shade to shade cannot be guaranteed as these are natural reactions to aging.
Â·Stretching: The natural elasticity of yarns combined with the weight of the woven material may cause shades to stretch upwards of 1â to 1 Â½â after installation. This is particularly noticeable on inside mount shades or shades that extend from ceiling to floor. Ordering the shade shorter than needed will help compensate for stretching over time. Note that the addition of edge banding will not only add a personal touch, but also help control stretching.
Â·Edge Banding: Edge banding is recommended for this product, as it helps to control stretching as described above, as well as the unraveling of thread on the shade.
*As provided by Bali Blinds specification information
Cleaning: Occasional light vacuuming with a brush attachment should keep shades clean.
Tips: During the shipping process, the natural shade material may have shifted slightly due to its woven construction, causing slight shortening of the shadeâs length or uneven edges.
Â·Height: If after installation, the shade is slightly shorter than ordered, grasp the bottom of the shade and gently pull to stretch the shade to the preferred height. Some materials will also stretch by themselves over time.
Â·Uneven Edges: Lightly tap the shadeâs edge with a flat edge (ex. A ruler) until even.
Baliâs Limited Lifetime Warranty
What is Covered: Bali woven wood blinds are warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that the product was properly installed in a residential dwelling, the product was made or assembled exclusively from Bali materials and components, andBaliâs recommendations were followed with regard to limitations and specifications.
Who is Covered: This warranty extends only to you as the original purchaser.
Obligations to the Consumer: The obligations of Bali are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning, or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these to be normal wear and tear and are not covered under this warranty.
This warranty is exclusive and in lieu of all other written or verbal warranties or obligations and liabilities. No person is authorized to extend or alter the warranty.
Size and Mounting Specifications
Comes with universal mounting brackets that allow for top or back mount. Side mount brackets available on request for shades up to 42" wide. Mounting Requirements
*Please note. Motorized depth does not include the battery pack. Side Considerations
| Lifting System|| Minimum Inside Mounting Depth|| Minimum Flush Mounting Depth|| Minimum Surface Area for Outside Mount|| Headrail Dimensions|
| Standard Lift Cord|| 3/4"|| 2 7/16"|| 3"||5/8" x 1 1/2"|
| Continuous Cord Loop|| 3/4"|| 3 3/16"|| 3"|| 5/8" x 2 1/2"|
|Cordless|| 3/4"|| 2 7/8" || 3" || 1/2" x 2 1/8" |
| Motorized*|| 3 /4" || 3 3/16" || 3"|| 5/8" x 2 1/2"|
| Top Down Bottom Up|| 3/4"|| 2 7/16"|| 3"||5/8" x 1 1/2"|
Standard Lift Cord Old Style and Standard RomanWidth:
10" - 96"Height:
12" - 120"Standard Lift Cord Looped RomanWidth:
12" - 96"Height:
12" - 120"Continious Cord LoopWidth:
24" - 196"Height:
12" - 108"CordlessWidth:
12" - 96" Height:
12" - 86"MotorizedWidth:
18" - 90"Height:
12"-90"Max Area No Liner:
9,149 sq inchesMax Area With liner:
5,712 sq inchesTop Down Bottom UpWidth:
14" - 96"Height:
12" - 120" Inside Mount Deductions
For an inside mount, we assume that the measurements provided are the exact measurements of the window opening without any deductions. The factory will make the necessary deductions to accommodate the brackets and headrail. Outside Mount Deductions
We assume that the width and height provided include the desired overlap and the shades will be made to the measurements provided.
Please refer to our measurement guide
or call us at 1-800-548-5711 if you have any questions regarding how to measure.