Bali 3/4" Restore Single Cell Shades feature a special coating that prevents the growth of microbes. These shades allow light to filtering into the room, providing some privacy and insulation.
Special Options
Standard Lift Cord
Standard option available at no additional charge. Controls can be placed on the left or right side and are approximately 1/3 of the shade height. Comes with standard cord cleat to keep the cord out of reach of children and pets to eliminate dangling cord hazards. Optional decorative cord management options available at an additional charge. Product will have one or more cord release devices based on compliance with ANSI/WCMA safety standards
Cordless
Safest window shade and ideal for homes with children and pets. All cordless lift shades should be used on windows where you can comfortably raise and lower the shade with your hand and have easy access
Continuous Cord Loop
Recommended for larger shades. A single continuous-loop cord raises and lowers the shade while the cord stays at the same length. This shade style stacks the fully raised shade more compactly and holds it more securely. A cord hold down device is included and must be installed properly to safely control the cord loop.
Motorized Lift
Window Treatments can be controlled from virtually anywhere in the home. A great solution for hard to reach windows and a safer option for children and pets. Low voltage motorization does not require costly hardwiring and is powered by battery pack or plug in transformer.
Specifications
Inside Mounting Requirements*Corded Shades (Includes standard lift, corded top down bottom up, and corded day night shades)Minimum Mounting Depth: 1 1/16"
Flush Mounting Depth: 2 1/4"
Cordless Shades (Includes cordless, cordless top down bottom up, and cordless day night shades)Minimum Mounting Depth: 5/8"
Flush Mounting Depth: 2 5/8"
Continuous Cord Loop Shades (Includes continuous cord loop and top down only)Minimum Mounting Depth: 5/8"
Flush Mounting Depth: 2 5/8"
Motorized Shades (does not include battery pack)**Minimum Mounting Depth: 5/8"
Flush Mounting Depth: 2 5/8"
Motorized Shades w/ Battery Pack Attached to Shade Bracket**
Minimum Mounting Depth: 1 3/8"
Flush Mounting Depth: 3 3/8"
Skylight
Minimum Mounting Depth: 1 1/16"
Flush Mounting Depth: 2 1/2"
Window top and bottom corners must be 90 degrees
Size Restrictions
Standard Lift Cord
Width: 9"-144"
Height: 12"-144"
Max Area: 12,000 sq inches
Corded Top Down Bottom Up
Width: 9"-120"
Height: 12"-96"
Corded Day Night Shade
Width: 12"-74"
Height: 12"-96"
2 on 1 Corded
Width: 18"-144"
Height: 12"-144"
Cordless
Width: 9"-120"
Height: 9"-86"
Cordless Top Down Bottom Up
Width: 15"-108"
Height: 9"-86"
Cordless Day Night Shade
Width: 15"-96"
Height: 12"-86"
2 on 1 Cordless
Width: 18"-144"
Height: 9"-86"
3 on 1 Cordless
Width: 27"-144"
Height: 9"-86"
Continuous Cord Loop
Width: 18 1/2"-144"
Height: 9"-144"
Max Area: 11,000 sq inches
2 on 1 Continuous Cord Loop
Width: 37"-144"
Height: 9"-144"
Top Down Only
Width: 18 1/2"-72"
Height: 12"-96"
Skylight
Width: 12 3/4"-61"
Height: 12"-61"
*minimum depth refers to the minimum depth needed to mount the brackets. Flush mount refers to the depth needed for the headrail to be fully recessed in the window opening. If the minimum mounting depth requirement is met, but not the flush, the headrail will be partially recessed in the window opening.
**Battery Case Considerations: Battery cases are installed in space outside of the product and can be a
challenge to hide in some windows. For inside mounts, the simplest method is to attach the battery pack with the integrated hanger that attaches directly to the mounting brackets. If the minimum depth to accommodate the battery case is not available it can be mounted to the side of the shade. Outside mounted shades may have the battery case mounted above or to the side of the shade.