- Crank Lifting System!
- Motorized Lifting System!
- Decorative Valance!
Crank Lifting System
Your shade is prepared for a wall installation, with the Crank Bracket on the right side of the shade. If you require the Crank Bracket on the left of the shade, or if you require a ceiling installation (or both), you will need to make a small change to your brackets.
Orders with the crank lifting system include a 4 foot pole to operate your shade as well as a bungee hold down system to secure the shade in mild weather. In inclement weather the shade should be raised. Please be advised, the warranty does not cover wind damage.
The default fabric rolls from the back side of the top tube. If you want the fabric to roll towards the front of your shade, simply roll your shade down until the fabric begins to roll itself back up. Note: if you reverse the roll direction of your fabric, you will need to move your Ring so it does not interfere with the fabric. Motorized Lifting System
Includes an adapter that plugs into a standard outlet (120v) to charge your shade and charges in approximately 3-4 hours. Comes with a FREE! multi channel remote control that can be programmed to control up to 5 shades per remote.
Includes a cable tie down system to secure the shade in mild weather. In inclement weather the shade should be raised. Please be advised, the warranty does not cover wind damage.Cleaning Your Shade
To clean your shade fabric, simply rinse with water and soap and scrub with a soft brush. If a motorized shade, unplug your shade before cleaning. Do not allow the motor to get wet. Note: using bleach or an abrasive cleaner will void your warranty. Roll the shade down to air dry. Your shade should be rolled up during high wind conditions.