Ivy
Levolor Blinds

All Mounting Hardware Included!

Stacking Options

• One Way Right: Vanes stack on right. Control is on the right.
• One Way Left: Vanes stack on the left. Control is on the left.
• Reverse Stack Left: Vanes stack on the left. Control is on the right. Not available with Autowand.
• Reverse Stack Right: Vanes stack on the right. Control is on the left. Not available with Autowand.
• Split Stack: Vanes split from the middle and stack on both sides of the window. Controls can be on either side.
• Center Stack: Vanes move in from the outside and stack in the middle of the window. Controls can be on either side. Not available with Backstacker or AutoWand.

Backstacker^®: The vanes stack neatly on the outer edge of the window, preserving the view. On a standard vertical shade, the vanes stack in front of the window. This option also extends the life of your blinds by reducing pull on the draw cord. This feature is not available with the center stack option.

Vane Options

• S-Shaped Vanes: Vanes overlap to create a soft, ripple fabric effect. The interlocking action of the vanes blocks out more light than the traditional curved vane.

Control Options

• Continuous Cord Loop: Comes standard of vertical blinds. It is a pulley system where the cord retains the same length no matter what position the blinds are in.
• AutoWand™ Feature: A one-control system that eliminates dangling cords and chains, providing for safe and smooth operation. The vanes are rotated and traversed with the wand. Available in white or ivory colors. This feature is not available with the backstacker option.

Valance Options

• DesignLine: A single-channel valance where fabric vane is inserted into. Choose from Round Wrap (Outside Mount Only), or Tailored Corners (Inside or Outside Mount).
• ShadowLine I: A standard size channel valance with a smaller channel below. Available outside mount only. Choose from Round Wrap, or Tailored Corners. Standard return size is 5”
• ShadowLine II: A double standard size channel valance. Available outside mount only. Choose from Round Wrap, or Tailored Corners. Standard return size is 5”.
• Decorative Valance: Available with round wrap corners only. A valance with an accent edge trim. Choose from 7 different trims.
• Visions™ Faux Wood Valance: Coordinates with Levolor Custom Wood Blind 2” Visions Faux Wood Collection.

Additional Options not shown on our website. Please call 1-800-548-5711 for pricing and details:

• Cut Outs
• Multicolored Blinds
• Angle Top Blinds
• Replacement Headrails
• Replacement Vanes

Click here to view Vane Face Direction chart

Measuring

• Inside Mount: Please provide us with the exact measurements of your window. Do not make any allowances as the factory will make all adjustments so the headrail will fit the opening properly and the vanes will clear the sill by ¼” – ½”.
• Outside Mount: Please provide us with the exact measurements of the area that you want to cover. It is recommended that the bind overlap at least 4” on each side of the window to ensure privacy. For height, it is recommended that the blind extend at least 3” above and 3” below the opening or window molding. For installations to the floor, deduct ½” from the height to ensure proper clearance. Specifying outside mount measurement means the factory makes allowances for headrail deductions only.

Vane Count and Stacking Chart

How to Use this Chart: use the appropriate column for one way to split draw blinds. Find the width that

you need to clear under the column marked “Clear Opening”. Order the blind size listed at the far left.

Split draw blinds must have an even number of louvers.

--

Minimum/Maximum Sizes

Headrail Dimensions:

Headrail is 1 13/16” deep x 1” high

Control Length

*Height of AutoWand is from top of headrail

Installation Brackets and Valance Clips